Need help?Do you have a question about the Rothenberger RP 50-S and is the answer not in the manual?
General| Brand | Rothenberger |
|---|---|
| Model | RP 50-S |
| Category | Water Pump |
| Language | English |
Connect the pressure hose to the equipment with valve V1 opened and V2 closed.
Open purge points, pump liquid to purge air, close vents, and fill installation.
Continue pumping until the desired test pressure has been reached.
Close valve V1 once the test pressure is attained.
If pressure exceeds limit, open valve V2 to reduce pressure to the required level.
If no pressure drop, open both valves V1 and V2 at test completion.
The hose used to connect the pump to the system being tested.
The primary valve for controlling pressure flow.
The secondary valve used for pressure release or purging.
A mechanism for securing the pump handle.
The component used to operate the pump.
The reservoir for the testing fluid.
To Next Page
