Rothenberger ROAIRVAC 6.0

Questions and Answers

N
nelsonstanleyAug 7, 2025
How to improve the ultimate vacuum on my Rothenberger ROAIRVAC 6.0?
- J
  Jeremiah ThomasAug 7, 2025
  To address poor ultimate vacuum in your Rothenberger Water Pump, first, ensure the pump has been running long enough, as the final vacuum level depends on the duration of operation relative to the volume being evacuated. Next, check for any leaks in the connections or the system; switch off the pump to see if the vacuum level holds. Also, verify that all connections and equipment used are appropriate. If issues persist, further assistance may be needed.
S
Sandra DaviesAug 12, 2025
What to do if the vacuum gauge doesn’t move on my Rothenberger ROAIRVAC 6.0?
- Z
  zdayAug 12, 2025
  If the vacuum gauge on your Rothenberger Water Pump isn't moving while the engine is running, first, verify that the pump is actually sucking in air. If it is, the vacuum gauge itself might be damaged. However, if the pump isn't sucking in air, the non-return solenoid valve could be blocked. If the problem persists, further assistance may be needed.
G
George VaughnAug 17, 2025
Why is my Rothenberger ROAIRVAC 6.0 Water Pump experiencing oil overconsumption?
- B
  Brandi MorrisonAug 17, 2025
  If your Rothenberger Water Pump is experiencing oil overconsumption, first ensure you are using ROTHENBERGER oil. Next, check that the drainage plug is tightly closed to prevent oil spillage. Also, inspect the connections and the system for any leaks, as open systems can increase oil consumption. If the problem persists, further assistance may be needed.
J
joshuachapmanAug 23, 2025
What to do if my Rothenberger Water Pump is overheating?
- S
  Sean RyanAug 23, 2025
  If your Rothenberger Water Pump is overheating, start by checking that it's adequately filled with oil. Next, ensure the pump isn't covered and has sufficient airflow around it. Also, verify that the power supply matches the pump's requirements as indicated on its label. If the issue continues, further assistance may be needed.
S
Samuel JohnsonAug 27, 2025
How to troubleshoot a Rothenberger ROAIRVAC 6.0 Water Pump that doesn’t work?
- A
  Ashley ChoiAug 27, 2025
  If your Rothenberger Water Pump isn't working, begin by ensuring it's properly connected to the power supply. Then, inspect the plug and cable for any signs of damage. Next, check that the power supply is suitable for the pump's requirements by referring to the pump's label. Also, verify that the pump is filled with oil. If problems persist, further assistance may be needed.
S
Sean EstradaSep 1, 2025
Why is my Rothenberger Water Pump so loud?
- S
  Sydney CooperSep 1, 2025
  If your Rothenberger Water Pump has a persistent loud noise, start by checking the fan cover for any damage, as impacts can affect the fan's movement. Next, ensure that the pump is securely screwed in place. If the noise persists, further assistance may be needed.

Summary

Instructions for Use

System Overview Diagrams

ROAIRVAC Product Components

Introduction and Declarations

EC Declaration of Conformity

Statement confirming product compliance with standards and directives.

Safety Notes

General Safety Instructions

Fundamental safety measures to prevent electric shock, injury, or fire.

Service and Maintenance Safety

Guidelines for regular maintenance, repair, and safe handling.

Working Safely

Practices for safe operation, including work area, personal protection, and tool use.

Special Safety Instructions

Specific safety guidelines for handling refrigerants and operating the vacuum pump.

Material Included

List of components provided with the vacuum pump.

Product Description

Overview of the vacuum pump's purpose and design for HVAC&R systems.

General Characteristics and Technical Data

Pump Setup and Operation

Initial Setup and Oil Filling

Mandatory steps for first operation, including oil filling and connection.

Power Supply and General Precautions

Ensuring correct power supply, grounding, and safe operating environment.

Pump Start and Operation Guidelines

Procedures for starting the pump and ensuring reliable operation.

Maintenance and Troubleshooting

Routine and Extraordinary Maintenance

Procedures for lubricating the pump and changing the oil, plus handling serious faults.

Troubleshooting Common Issues

Guidance for diagnosing and resolving problems like non-operation or overheating.

Customer Service and Disposal

Customer Service Contact Information

Details for obtaining support, accessories, and spare parts.

Product Disposal Guidelines

Instructions for environmentally friendly disposal and recycling.

Rothenberger ROAIRVAC 6.0 Specifications

General

Power	0.37 kW
Dimensions	350 x 200 x 250 mm
Weight	12 kg
Type	Rotary vane pump
Pumping speed	170 l/min
Vacuum	15 micron
Max vacuum	15 micron
Air displacement	6 CFM / 170 l/min
Oil capacity	700 ml