ROTORCOMP VERDICHTER Operating Manual - EVO
®
Line
4.2 [en] 07/2020
4.3 Transporting unpacked system
The screw compressor air end can be moved with
a crane or with a lift truck or forklift truck when fas-
tened to a transport pallet.
Warning:
Death or serious injuries due to falling cargo!
– Observe the local safety regulations!
– Select the lifting equipment in accordance with
the total weight to be transported!
– Remove all loose or swinging parts before lift-
ing the screw compressor air end!
– Remove drive or body components before-
hand!
– Only transport the compressor air ends while
depressurized!
– When transported on a pallet, the compressor
air end must be securely fastened to it!
– Do not transport the compressor air ends on
the forks of a stacker or lift truck!
– Transport eyes are only designed for transport-
ing the compressor air ends!
– Do not stand or walk under cargo during trans-
port!
– The air end must not contain oil, connections
must be sealed with a plug or other suitable
means.
To transport on a pallet, secure the screw com-
pressor air end on the pallet with angle brackets.
Figure 4-1
To Next Page
Loading...
