rotowash R20 - Assembly; Installing the Stick Handle; Installing the Loop Handle; Installing the Bowdencontrol

To Next Page

To Previous Page

ASSEMBLY

Installing the stick handle for

L, T

Place the handle (1) on the plastic

handle connector on the fork and

push connecting pin (2) through to

locate handle.

Insta

lling

the

loop handle for

A, B, S

Place the loop handle on the

aluminium handle connectors and fit

spring loaded bolts to locate.

Lead the plastic tube from the tank

water valve on model S into the clean

water tray, on model B connect to the

pump (spraying unit) inlet.

Installi

ng the bowdencontrol for

, T,

A, S

Lead the bowdencontrol under the

handle into the cleanwater tray and

screw together the water valve tube

and the plastic nut.

Be careful not to twist the

bowdencontrol and test the ease of

operation by pushing the red button at

the top end of the stick handle.