EasyManua.ls Logo

rotowash R20 - Setting Brush Pressure; Manner of Use; Machine Moving Forward;Backwards

rotowash R20
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting brush pressure
The brush pressure can be adjusted
by turning the adjustment knob.
Position 1 is for hard floors, Position
2 is for carpets.
Position 1
Position 2
Manner of use
Move the machine in a forward
direction. By pushing the red
button near the handgrip of the
stick handle, or the pump
activating lever on the loop handle,
water is spread on to floor and
serves to clean the floor. When the
machine is moved backwards the
soiled water is collected in the
wastewater tray.
Model B is also suitable for
working in only one direction.
Machine moving forward:
Cleaning liquid should be sparingly
spread by activating the red
button/pump lever.
Machine moving backwards:
Soiled water is collected, if
necessary repeat operation.