EasyManua.ls Logo

rotowash R20 - Starting; Scrubbing in Lifted-Up Position; Cleaning Liquid; Tray Capacity;Tank Capacity

rotowash R20
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WORKING WITH
ROTOWASH
Cleaning liquid
Use only cleaning liquids which are
recommended by a cleaning expert.
If in doubt consult your ROTOWASH
dealer.
Tray capacity:
20 1,0 Litre (2 pints)
30 1,5 Litre (3 pints)
45 2,2 Litre (4 pints)
60 3,0 Litre (6 pints)
Pour the cleaning liquid into the
cleanwater tray (L, A) or in the case
of T, S, B into the tank. Test the
correct function of the watervalve by
activating the bowden control.
Tank capacity:
Tank for stick handle: 3 litre
Tank for loop handle: 7 litre
Starting
With machines with loop handle
only, place the on/off switch in
on position.
By rocking the handle to the right
and pulling back the motor is
started, further pulling back will
lower the machine on to the
brushes.
Scrubbing
in lifted-up position
Wastewater tray is raised above
drum as shown
Start