RMS-LOG Wireless / LAN Data Loggers
E-M-RMS-MLOG-868-V1_0.docx
Instruction Manual
5.3 Function Overview
Overview of the main software functions of the device
The measured data are sent to the RMS server software at the
set interval directly after the measurement.
The measured values of every measurement are saved in the
internal ring memory (10,000 pairs of measured values). If the
data cannot be sent to the server software directly, they are kept
in the device and then sent later as soon as the connection to
the server software has been restored.
The firmware of the device can be updated directly via the RMS
server software.
© 2016 ROTRONIC AG Bassersdorf Switzerland Page 15 of 22
To Next Page
Loading...