What to do if the Roundup Egg Cooker unit fails to operate and the control panel lights don't turn on?
First, ensure that the power is on and the power cord is securely locked into place. Then, check the main circuit breakers. If that doesn't work, try plugging the power cord into a different electrical outlet with the same amperage rating.
Why is my Roundup ES-1200 Egg Cooker unit not heating up?
Several factors can cause this. First, make sure you have filled the trough in the top cover with water before starting the time cycle. Also, ensure the unit and table are level. You may also need to check the platen temperature, referring to the Maintenance section for guidance.
What to do if eggs are sticking to the platen of my Roundup ES-1200?
This could be happening because the platen is dirty, so clean it thoroughly. Also, make sure you're using enough butter; refer to the Operation section for guidance on the correct amount.
What to do if the 'Bacon' or 'Ready' signal is not working on my Roundup Egg Cooker?
If the indicator light or audio signal isn't working, it may require professional attention. Also, check if the Bacon Timer is disabled and enable it according to the Operation section.
Guidelines for placing and preparing the unit for its first use.
Step-by-step instructions for cooking eggs and ham using the unit.
Explanation of LED indicators on the control board for status and diagnostics.
Diagnostic codes indicated by the Green LED blinking patterns.
General| Model | ES-1200 |
|---|---|
| Capacity | 12 eggs |
| Voltage | 120 V |
| Auto Shut-off | Yes |
| Indicator Light | Yes |
To Next Page