EGG STATION (ES-1200)
9
P/N 1011119 Rev. B 03/12
1. Turn the power off, unplug the power cord, and
allow the unit to cool down before proceeding.
2. Put on safety equipment.
3. Empty and replace the Grease Catch Pans
before starting to clean the grill, if necessary.
4. Scrape all the grease and debris from the grill
surface into the Grease Catch Pans.
5. Apply a small amount of butter-flavored vegetable
oil to the grill.
MAINTENANCE
WARNING
Turn the power off, unplug the power cord, and
allow the unit to cool down before performing any
CAUTION
Chlorides or phosphates in cleaning agents (e.g.
could cause permanent damage to stainless steel
equipment. The damage is usually in the form of
discoloration, dulling of metal surface finish, pits,
-
tips are recommended for maintenance of your
stainless steel equipment:
Always use soft, damp cloth for cleaning, rinse
with clear water and wipe dry. When required,
always rub in direction of metal polish lines.
using soap and water.
CAUTION
materials. The use of these may cause damage to
the stainless steel finish.
CAUTION
If a chemical cleaner is used, be sure it is safe to
and warnings on product label.
6. Scrub the grill from front to rear using the griddle
pad, screen, and holder. Clean all cracks and
edges.
7. Wipe the grill surface with a dry cloth to remove
residue. Then wipe clean with a damp cloth.
8. Remove and empty the grease catch pans.
9. Wash the Grease Catch Pans in dish detergent
solution.
10. Rinse the Grease Catch Pans in clean water and
replace on the unit.
To Next Page
Loading...