To Next PageTo Next PageHow to fix Rovatti Pompe Water Pump overheating?
If your Rovatti Pompe Water Pump is overheating, there are a couple of things you can check. First, the gland packing might be too tight, so try loosening it. Second, there might be insufficient capacity, so open the discharge valve to increase the capacity.
What to do if Rovatti Pompe Water Pump has air pockets?
If your Rovatti Pompe Water Pump or pipeline is inadequately filled or has air pockets, you should eliminate the air from the pump and pipeline.
What to do if Rovatti Pompe S2K65/2 bearing or wear ring is damaged?
If you have a damaged bearing or wear ring, stop the pumping unit.
Why is my Rovatti Pompe Water Pump making noise and vibrating?
Noise and vibrations in your Rovatti Pompe Water Pump can stem from several causes. It might be due to the pump or pipeline not being adequately filled or having air pockets—in this case, eliminate air from the pump and pipeline. Alternatively, there could be an excessive suction head, excessive wearing of hydraulic components, or the pump and motor could be misaligned or wrongly coupled; for these issues, it's best to contact the installer of the pumping unit or Assistance Service. Pipe resonance can also cause vibrations, so contact the installer of the pumping unit. Check the oil quantity and integrate if necessary, if missing bearings lubrication is the cause. Finally, unbalanced rotor or defective or worn bearings can cause noise and vibrations, so contact Assistance Service, in the l...
Details about the pump manufacturer, Rovatti A. & Figli Pompe S.p.a.
Information about the location and importance of the pump's identification plate.
Provides essential safety precautions for handling and operations.
Specifies the personal protective equipment needed for safe operations.
Details potential hazards that remain even after safety measures are applied.
Lists actions that employees must not perform to ensure safety.
Describes conditions and uses that are not recommended or are dangerous.
Specifies the operational limits and conditions for the pumps.
Lists checks to perform on the pump after receiving it.
Covers the procedures and requirements for installing the pump correctly.
Step-by-step instructions for safely starting the pump-motor unit.
General| Brand | Rovatti Pompe |
|---|---|
| Model | S2K65/2 |
| Category | Water Pump |
| Language | English |
