56
USER MANUAL
RESETTING THE CAMERA
Press the RESET Button at the bottom of the camera
once. If the camera is freezing or stuck where no
buttons will respond, then please press the RESET
button only ONCE at the bottom of the camera with a
paper clip or tip of the pen while it is turned ON. This
will restart the camera.
If you get stuck with any settings and if you would like
the camera's all settings to set back to the factory default
settings, then simply go to System Settings > and then
scroll down until you see the DEFAULT settings then set
them to default settings to reset all the settings.
Resetting Hardware & Software are two different things.
To Next Page
Loading...
