Rowenta Clean&Steam Multi - Cleaning surfaces - portable Steam Cleaner

11
EN
Note: These recommendations should be respected in order to avoid damage to oors.
• We recommend that you check the user guide and any warnings from the oor manufacturers. You should
carry out a test on an area of the surface to be cleaned before beginning.
• For the soft oorings (carpets, rugs), please use the carpet glider. First let the steamed part to dry in order to
make sure that no changes in color or deformation have occurred.
Warning !
Do not use on unsealed wood or unsealed laminate oors. On
surfaces that have been treated with wax, the sheen may be
removed by the heat and steam action. It is always recommended
to test an isolated area of the surface to be cleaned before
proceeding. We also recommend that you check the use and
care instructions from the oor manufacturer.
To sanitize your oor on the best way, place the appliance over the area to be disinfected using continuous
steam for at least 60 seconds.
• Cleaning surfaces - portable Steam Cleaner
The portable steam cleaner should be always used with the
exible hose. It can be only used on the washable surfaces.
Attention! Before cleaning any surface, please rst check its
reaction on steam at a small part hidden from sight.
For cleaning hard surfaces, use universal brushes. Adjust level
of steam power (eco or max) according to the surface fragility.
Do not use on oiled surfaces (furniture, kitchen working
top and others)
For cleaning glass, windows and tiles, use the squeegee at eco
steam position.
Preheat the windows at a distance of 50 cm from the
surface during winter time. After preheating, start to clean.
For textiles refreshment, use the squeegee with a microber
sock at eco steam position. Let a small steamed part dry in