EasyManua.ls Logo

Rowenta Expert Style IS34 Series - User Manual

Rowenta Expert Style IS34 Series
33 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.rowenta.com
IS34
EN
FR
ES

Questions and Answers

  • J
    Julie ShahAug 5, 2025
    Why is there no steam coming from my Rowenta Expert Style IS34 Steam Cleaner?
    • C
      Calvin LewisAug 5, 2025
      If your Rowenta Steam Cleaner isn't producing steam, several factors could be the cause. First, ensure the appliance is correctly plugged in and turned on using the power knob; the indicator light should be lit. Check the hose to make sure it isn't bent or twisted, which could obstruct the steam flow. Also, the water tank may be empty, so switch off the device and refill it. Finally, remember that the appliance needs about 45 seconds to heat up and start producing steam after being switched on.
  • K
    Kimberly GillAug 12, 2025
    What to do if Rowenta Expert Style IS34 Steam Cleaner steam flow is low?
    • K
      Kenneth ThomasAug 12, 2025
      A low steam flow in your Rowenta Steam Cleaner can stem from a few reasons. It may be due to scale buildup from infrequent rinsing; see the descaling process paragraph. Check the hose to ensure it is not bent or twisted and that the pole is completely extended. Also, make sure the water tank isn't empty; if it is, switch off the appliance and refill the water tank.
  • L
    lmooreAug 20, 2025
    What to do if water runs through the holes of the steam head of Rowenta Expert Style IS34?
    • J
      jessica18Aug 20, 2025
      If water runs through the holes of the steam head of your Rowenta Steam Cleaner, it's likely due to condensation in the hose. To resolve this, avoid using the steam head in a horizontal position. Instead, hold the hose vertically outstretched and wait for the condensed water to return to the steamer. Also, ensure the pole is completely extended.
  • M
    Michael MarshAug 28, 2025
    Why does my Rowenta Expert Style IS34 Steam Cleaner take a long time to heat and/or eject white particles?
    • B
      Bruce ThompsonAug 28, 2025
      If your Rowenta Steam Cleaner takes a long time to heat up or ejects white particles, it's likely due to scale buildup from not descaling it regularly; see the descaling process paragraph.

Summary

Important Safety Instructions

Troubleshooting

Product Description

Hanger; Steam Head Holder

Component for hanging garments or supporting the steam head.

Steam Head

The part that emits steam to iron clothes.

Steam Hose and Locker

Connects the steam generator to the steam head and locks it.

Adjustable Poles, Locks, and Hook

Telescopic pole system with locks and a hook for hanging.

ON;OFF Button and Steam Control

Controls for powering the unit and adjusting steam output.

Removable Water Tank

The container that holds water for steam generation.

Draining Cap

Cap used for draining the water tank or anti-calc system.

Vertical Support

The adjustable pole structure that supports the garment hanger.

Fabric Brush

Accessory to improve steam penetration on fabrics.

Hanger & Clips

Component for hanging clothes, sometimes with clips.

Assembly

Pole Assembly

Insert, unlock, extend, and lock the telescopic pole sections.

Component Attachment

Attach hanger, vertical support, steam head, and connect steam hose.

Before Use

Remove Water Tank

Take the water tank out of the appliance.

Fill Water Tank

Fill the water tank with water after removing the cap.

Replace Water Tank

Screw the cap and reinsert the water tank into the appliance.

Accessories

Fabric Brush Usage

Use the fabric brush to improve steam penetration on fabrics.

Use

Appliance Setup and Operation

Position horizontally, plug in, turn on, and adjust steam output.

Steam Emission

Steam emission begins approximately 45 seconds after powering on.

Steaming Technique

Direct steam from top to bottom on garments for optimal results.

User Safety Precautions

Never direct steam at people or animals during use.

After Use

Turn Off and Unplug

Switch off the appliance and disconnect it from the power outlet.

Empty and Store Water Tank

Empty the water tank, screw back cap, and replace it.

Cord Management and Cooling

Roll up the power cord and let the appliance cool before storing.

Descaling Procedure

Descaling Frequency and Preparation

Descale every 6 months or if performance drops, after cooling down.

Descaling Steps

Fill tank, shake, unscrew anti-calc cap, and empty mixture.

Reassembly and Rinse Cycle

Reassemble parts and run a rinse cycle to clean the system.

Cleaning

Cooling and Base Cleaning

Allow appliance to cool, then clean the base with a damp sponge.

Steam Head Cleaning

Clean the steam head using a damp sponge and water.

Cleaning Warnings

Do not use detergents or wash directly over a sink.

Rowenta Expert Style IS34 Series Specifications

General IconGeneral
BrandRowenta
ModelExpert Style IS34 Series
CategorySteam Cleaner
LanguageEnglish

Related product manuals