Rowenta GS4010U1 - User Manual

Questions and Answers

L
Laura BakerAug 11, 2025
Why is my Rowenta Steam Cleaner not producing steam?
- L
  Lisa VincentAug 11, 2025
  If your Rowenta Steam Cleaner isn't producing steam, several factors could be the cause. First, ensure the appliance is correctly plugged in and the illuminated on/off switch (on the front of the base) is pressed. Next, check the water level and refill it to the max line on the water tank if it's too low. Also, make sure the hose isn't kinked by fully unraveling it. Finally, if the tank is empty, unplug the steamer and refill it.
C
Cory WallAug 21, 2025
What to do if my Rowenta Steam Cleaner has little steam?
- B
  Beth CooperAug 21, 2025
  If your Rowenta Steam Cleaner is producing only a little steam, it could be due to a few reasons. Your steamer may have a scale build-up because it hasn't been rinsed regularly; descale it at least once a year or every 100 hours of use, increasing frequency if you have hard water. Also, check the water level; if it's too low, turn off the appliance and refill it. Conversely, if there's too much water, unplug the steamer and empty it partially.
A
Alejandra MyersAug 31, 2025
Why is water running through the holes of the steam brush of my Rowenta Steam Cleaner?
- C
  Christopher MosesAug 31, 2025
  If water runs through the holes of the steam brush on your Rowenta Steam Cleaner, it's likely due to condensation in the hose or a scale build-up. To resolve condensation, avoid using the steamer horizontally; instead, hold the hose vertically outstretched and wait for the water to flow back into the steamer. If scale is the issue, rinse out the steamer at least once a year or every 100 hours of use, increasing the frequency if you have hard water.