Why is there no steam coming from my Rowenta IS 6200?
Several factors could be preventing steam production. First, ensure the appliance is correctly plugged in and turned on using the On/Off pedal; the power indicator light should illuminate. Also, inspect the hose for any bends or twists that might be causing an obstruction. Finally, check the water tank level and refill if empty.
What to do if the steam flow is low on my Rowenta IS 6200?
A low steam flow could be due to two reasons. The first one is scale build-up from infrequent rinsing. See descaling process (Cleaning paragraph). Also, inspect the hose for any bends or twists that might be causing an obstruction.
What to do if water runs through the holes of the steam head of my Rowenta IS 6200 Steam Cleaner?
If water runs through the holes of the steam head, there is likely condensation in the hose. To resolve this, never use the steamer in a horizontal position. Hold the hose vertically outstretched and wait for the condensed water to return to the steamer.
Why does my Rowenta Steam Cleaner take so long to heat up and eject white particles?
The steamer may take a long time to heat and/or eject white particles if it has a build-up of scale because it has not been descaled regularly. See descaling process (Cleaning paragraph).
Steps for assembling the pole and hanger of the garment steamer.
Instructions for filling the water tank with tap water.
Instructions for attaching and using the fabric brush accessory.
Instructions for attaching and using the crease attachment.
Instructions for using the lint pad accessory independently.
Details of the 1-year manufacturer's guarantee against defects.
Conditions and exclusions that apply to the Rowenta manufacturer's warranty.
Explanation of consumer statutory rights not affected by the warranty.
Information on purchasing accessories and replaceable parts.
General| Brand | Rowenta |
|---|---|
| Model | IS 6200 |
| Category | Steam Cleaner |
| Language | English |
To Next Page