M
margaretscottJul 30, 2025
Why is there no steam coming from my Rowenta Steam Cleaner?
- TTerry HenryJul 30, 2025
Several factors could be at play. First, ensure the Rowenta Steam Cleaner is correctly plugged in and switched on, and allow about 15 seconds for steam to become available. If that doesn't work, the water level might be too low, or the pump can't reach the water. Regularly return the appliance to a vertical position. If it's still not working, unplug it and refill the water. Also, the steam pump may not be primed, so press the steam trigger continuously until steam appears. If you're using the appliance for the first time, this priming might be necessary. Finally, check that the water tank is correctly set by sliding it up.









