What to do if the Royal Sovereign Sigmont 65H Laminator rollers are not turning after pressing the 'RUN' button?
If your Royal Sovereign Laminator has power but the rollers aren't turning after pressing 'RUN', consider the following: * Make sure the emergency switch(es) is (are) disengaged. * Check for and remove any obstructions blocking the safety sensor. * Replace the motor fuse.
Why is my Royal Sovereign Laminator not heating up?
If your Royal Sovereign Laminator isn't heating, make sure you have raised the temperature. The heater, bimetal, or T-fuse failure may also be the reason.
What to do if my Royal Sovereign Sigmont 65H machine will not turn on?
If your Royal Sovereign Laminator doesn't turn on, check these potential causes: * Ensure the power cord is properly plugged into the outlet. * Verify the power switch is in the “I” (On) position. * Reset the circuit breaker if it has tripped. * Replace the main power fuse if it has blown.
How to fix curled lamination on a Royal Sovereign Sigmont 65H?
To correct curled lamination with your Royal Sovereign Laminator: * For an upward curl, loosen the top roll film tension. * For a downward curl, loosen the bottom roll film tension.
General| Brand | Royal Sovereign |
|---|---|
| Model | Sigmont 65H |
| Category | Laminator |
| Language | English |
To Next Page