Need help?Do you have a question about the Royal Sovereign RSC-1402HW/CW and is the answer not in the manual?
General| Model Number | RSC-1402HW/CW |
|---|---|
| Maximum Laminating Width | 14 inches |
| Warm-up Time | 5 minutes |
| Maximum Pouch Thickness | 10 mil |
| Number of Rollers | 2 |
| Carrier Required | No |
| Type | Hot and Cold Laminator |
| Roller Type | Silicone |
| Power Supply | 110V, 60Hz |
Diagnosing and resolving issues where the laminator rollers are not reaching the desired temperature.
Troubleshooting steps for when the laminator rollers become excessively hot, focusing on sensor connections.
Identifying causes and solutions for the laminator rollers failing to operate or move.
Steps to diagnose and fix power supply issues when the laminator does not turn on.
Procedure for adjusting the take-up shaft speed by loosening or tightening a bolt on the cover.
Steps for adjusting front roller pressure using an Allen wrench and checking tension with a push-pull scale.
Instructions for installing the front feeder option using hexagon bolts.
Steps for installing the rear rewinder option, including cover removal and component reinstallation.
To Next Page