Royal Sovereign RSC-1400C User Manual

19
RSC-1400C/1400H Laminators
OWNER'S MANUAL
Royal Sovereign International Inc.
17. WARRANTY
Royal Sovereign International warrants the equipment sold is free from defects in
material and workmanship for a period of One (1) year for Parts and Labor from the date
of installation, excluding lamination rollers which are warranted for Six (6) months. This
warranty is extended only to the original purchaser. This warranty is the only warranty
made by Royal Sovereign International and cannot be modified or amended. Royal
Sovereign’s sole and exclusive liability and the customer’s sole and exclusive remedy
under this warranty shall be, at Royal Sovereign’s option, to repair or replace any such
defective part or product. These remedies are only available if Royal Sovereign’s
examination of the product discloses to Royal Sovereign’s satisfaction that such defects
actually exist and were not caused by misuse, neglect, attempt to repair, unauthorized
alternation or modification, incorrect line voltage, fire, accident, flood or other hazard.
The warranty made herein is in lieu of all other warranties, expressed or implied,
including any warranty or merchantability or fitness for a particular purpose. Royal
Sovereign will not be liable for personal damage or personal injury (unless primarily
caused by its negligence), loss of profit, or other incidental or consequential damages
arising out of the use or inability to use this equipment.
This warranty specifically does not cover damage to laminating rollers caused by knives,
razor blades, or any sharp objects or abrasives, or failure caused by adhesives, or
damage caused by lifting, tilting and/or any attempt to position the machine other than
rolling on the installed castors or feet on even surfaces, or improper use of the
machine. Warranty repair or replacement by Royal Sovereign or its authorized
Reseller(s) does not extend the warranty beyond the initial one year period from the
date of installation. Unauthorized customer alterations will void this warranty.
LIMITED WARRANTY
www.royalsovereign.com
Read all instructions carefully before use.
For any Customer Support needs please choose the
Customer Support tab on www.royalsovereign.com
RS Holland B.V.
Columbusstraat 25 - 3165 AC Rotterdam,
The Netherlands
E-mail : paulchoi@royalsovereign.com
henryabrahamian@royalsovereign.com
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
E-mail : salesaust@royalsovereign.com
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025 FAX : +1) 201-750-1022
E-mail : info@royalsovereign.com
Royal Sovereign Inc. <Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800 FAX : +82)2-2025-8830
E-mail : sales@royalsovereign.com
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
) 416-741-8400 FAX : +1) 416-741-8185
E-mail : info@royalsovereign.com

Royal Sovereign RSC-1400C Specifications

General

Model	RSC-1400C
Category	Laminator
Maximum Width	14 inches
Maximum Thickness	10 mil
Roller Number	2
Carrier	No
Hot and Cold Lamination	Yes
Type	Roll
Laminating Thickness	3 mil to 10 mil
Roller Type	Silicone
Warm-up Time	3-6 minutes

Summary

Warranty Information

Limited Warranty Exclusions

Specific exclusions and limitations to the standard warranty coverage for the laminator.

Safety Precautions

Installation Guide

Electrical Requirements

Details on the necessary power supply and electrical connections for proper laminator installation.

Included Accessories

Product Identification

Control Panel Overview

Control Button Functions

Detailed descriptions of each button on the control panel and their respective functions.

Speed and Temperature Settings

Roller Nip Adjustment

Foot Pedal and Remote Control Operation

Using the Foot Pedal

Steps for operating the laminator hands-free using the foot pedal control.

Using the Remote Control

Guide on using the remote control for starting, stopping, and reversing the laminator rollers.

Using the Cross Cutter

Loading Lamination Film

Threading Film Process

Decaling Procedure

Detailed steps for decaling the film onto the laminator rollers for proper threading.

Mounting Procedure

Optional Accessory Installation

Laminator Maintenance

Cleaning the Laminator Body

Guidelines for cleaning the exterior of the laminator with water.

Removing Adhesive Build-Up

Methods for removing adhesive residue from rollers using specific cleaning materials.

Lubrication Recommendations

Recommendations for lubricating drive chains and sprockets for optimal performance.

Troubleshooting Common Issues

Technical Specifications