1-4
1.4 SAMPLE HOLDERS
Sample holders (SH), manipulators (MPS), and test piece holders (TPS) are available to
suit a wide range of sample types and sizes. The standard System 610 manipulator and
sample holders are detailed on the following 2 pages. Custom sample holders, built to
user specified dimensions, are also available. Please contact the factory for further
information.
MPS-12 Manipulator
The MP-12 manipulator connects to any
Royce Instruments’ test piece holder (TPS)
to hold samples on the System 610.
Please contact the factory for information
on standard or custom test piece holders.
MPS-14 Manipulator
The MPS-14 Manipulator uses a 4:1
pantograph linkage to help the operator
position parts very precisely.
To Next Page
Loading...