Royce 610 - Park Time

To Next Page

To Previous Page

3-5

CODE 7:

This selection allows the operator use the keypad to edit the description of fail

code #7.

CODE 8:

This selection allows the operator use the keypad to edit the description of fail

code #8.

CODE 9:

This selection allows the operator use the keypad to edit the description of fail

code #9.

FORMAT

This selection allows the operator to select the desired date format from the

following options: MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD.

DATE

This selection allows the operator to set the system date, month, and year. The

left and right mouse buttons change each digit. The center button sets the value

and advances the cursor.

TIME

This selection allows the operator to enter the current time. The time is displayed

in 24 hour format and can be set to any time from 00:00:00 to 23:59:59. The left

and right mouse buttons change each digit. The center button sets the value and

advances the cursor.

PARK TIME

This selection allows the operator to set the number of minutes that the system

may remain idle before it returns to the reset position.

COLLISION

This selection allows the operator to select the force at which the test head stops

moving after the hook makes contact.

UNIT

This selection allows test results and statistics to be displayed and printed in

inches or millimeters. Press the center mouse button to toggle the setting.

RS232 EA TEST

This selection allows the operator to select whether or not each test will be sent to

the RS232 port. Press the center mouse button to toggle the setting.

PRINT HEADER

This selection allows the operator to select whether or not the printout will include

a header section. Press the center mouse button to toggle the setting.