2-9
2.4.3 Keypad
Alphanumeric data entry is accomplished through the use of an optional keypad. Within
the sub-menus, the keys are used to enter and edit failure code and operator
identification text. Immediately following each test, the keys can be used to enter failure
codes or to void test results.
2.4.3.1 Test Screen Keypad Functions
Immediately following a test, the test may be assigned a failure code or the test results
may be voided.
To assign a failure code to a test; press the number key (0 - 9) that corresponds to the
observed failure. (The failure code text that is assigned to each code number may be
edited with the keypad in the TEST SETUP menu.) To void a test press the star key (∗).
Voided tests are removed from all statistical analysis.
2.4.3.2 Sub-menu Keypad Functions
Several sub-menu selections allow alphanumeric data entry through the use of the
keypad. The keypad includes an overlay that illustrates the characters that may be
entered with each key. When a key is pressed, it will display a character at the cursor
location. To display an alternate character from the overlay, press the key again.
Repeating this procedure will cycle the display through all characters that are available
for that key. Pressing the number sign key (#) accepts a character entry and moves the
cursor to the right. Pressing the star key (∗) accepts a character entry and moves the
cursor to the left. Pressing the center mouse button will accept the entire selection and
return the user to the sub-menu.
To Next Page
Loading...