5-7
5.4 RS232 DATA OUTPUT
Selections in the “STATISTICS” menu allow test data or a report to be sent to the RS232
port. A selection in the “TEST SETUP” menu allows each test result to be sent to the
RS232 port as it is completed. The RS232 report format will contain the same elements
as the selected printout format.
The following describes the RS-232 output format from System 610.
Baud : 9600
Bit : 7
Parity : Even
Stop : 1
Flow : none
1 2 3 4
1234567890123456789012345678901234567890
========================================
nnnnn, fff.f ,”ssssssssssssssssss” , ccCL
nnnn accumulative test number
fff.f test force result in grams
sss..sss failure mode description (in quotes)
cc failure mode code
C carriage return, ASCII code 13
L line feed, ASCII code 10
To Next Page
Loading...