7-2
7.1 OVERVIEW
This section provides functional details of the System 610 menu structure. Descriptions
are provided for each menu and menu item. Directions concerning parameters or entries
are detailed for each menu item.
To enter the Main Menu from the Test Screen, press the MENU key on right side of front
panel or press and hold the center mouse button for 3 seconds.
Use the mouse to scroll through the sub-menu choices: “TEST SETUP”, “STATISTICS”,
or “SERVICE”. The left and right mouse buttons move the cursor up and down, and the
center mouse button selects the item next to the cursor. Left and right mouse buttons are
programmable.
To Next Page
Loading...