7-10
7.4 THE “SERVICE” MENU
The “SERVICE” menu contains calibration and lighting control options. A description of
all “SERVICE” menu choices follows.
CALIBRATE
This selection allows the operator to calibrate the system. Press the center mouse
button and follow the procedure indicated on the LCD.
CHECK CALIBRATION
This selection allows the operator to confirm the calibration status of the system.
Press the center mouse button and hang a weight of known value on test hook.
Compare the displayed value to the known weight to determine calibration
accuracy.
TEST ANALOG
This selection displays the analog sensor value.
LIGHT ON/OFF
Press the center mouse button to toggle the test illumination light ON or OFF.
To Next Page
Loading...