RPB Nova 3 - Product Care; Instructions for Specific Uses or Environments

12
NOVA 3
®

Airow stops or slows down.

Breathing becomes difcult.

You become dizzy, nauseous, too hot, too cold, or ill.

Your eyes, nose, or skin become irritated.

The work area is a conned space (unless proper measures are taken for conned spaces).

You taste, smell, or see contaminants inside the helmet.

You have any other reason to suspect that the respirator is not providing adequate protection.
PRODUCT CARE
Never place the helmet on hot surfaces. Do not apply paints, solvents, adhesives or self-adhesive
labels except as instructed by RPB
®
. This product may be adversely affected by certain chemicals.
Clean with mild detergent and a soft cloth or a disinfectant wipe. See the “Respirator Setup and
Care” section for more specic cleaning instructions.
INSTRUCTIONS FOR SPECIFIC USES OR ENVIRONMENTS
Conned Spaces
If this respirator is used in conned spaces, ensure the area is well ventilated and that all
contaminant concentrations are below those recommended for this respirator. Follow all procedures
for conned space entry, operation, and exit as dened in applicable regulations and standards.
Abrasive Blasting
Do not use hazardous abrasives (e.g. those that violate applicable standards/regulations, such as
abrasives containing more than trace amounts of silica, lead, arsenic, etc.) - these could result in
serious injury or death. Consult your abrasive supplier and read the material safety data sheets
for the abrasives to be used to determine suitability for blasting applications.
PRODUCT USER SAFETY INSTRUCTIONS CONTINUED