To Next PageTo Next Page
Need help?Do you have a question about the RPB Nova 3 and is the answer not in the manual?
Details respiratory protection capabilities, assigned protection factors, and limitations for safe use.
Specifies conditions under which the NOVA 3® respirator must NOT be used for user safety.
Covers ANSI/ISEA Z87.1 compliance and protection limits for the face and eye area.
Explains ANSI/ISEA Z89.1 Type 1C compliance for head protection and fit adjustment.
Stresses the need for hearing protection when exposed to noise levels exceeding OSHA permissible exposure limits.
Guidance on locating a clean air source and using appropriate filters and monitors for supplied air.
Requirements for breathable air quality, including CGA G-7.1 Grade D standards and CO monitoring.
Specifies the use of RPB® hoses and fittings, and correct hose section lengths.
Instructions on monitoring and setting air pressure at the point of attachment for proper function.
Emphasizes training, medical evaluation, and reading manuals before using the respirator.
Checklist for verifying all required components are present and correctly assembled for NIOSH approval.
Guidance on confirming the NOVA 3® provides suitable protection based on job hazard analysis.
Steps to verify airborne contaminants are within limits and the breathing air filter is working.
Lists critical conditions that prohibit entry into the work area to ensure user safety.
Conditions requiring immediate exit from the work area to prevent harm.
Guidelines for cleaning and maintaining the respirator to ensure its longevity and performance.
Guidance on using the respirator in specific environments like confined spaces or for abrasive blasting.
Instructions for installing and securing the inner lens and its frame within the respirator.
Steps for placing tear-off and outer lenses onto the respirator for clear vision and protection.
Detailed steps for connecting the breathing tube and air supply hose to the respirator components.
Procedures for inspecting, maintaining, and cleaning various respirator components like lenses, tubes, and helmet.
Guides on safely removing and replacing the visor assembly using provided tools.
Step-by-step instructions for properly putting on and fitting the NOVA 3® respirator helmet.
Procedures for safely removing the respirator helmet after use, maintaining cleanliness.
Lists and illustrates various components that make up the respirator helmet assembly.
Details the different padding components and their specific part numbers for comfort and fit.
Identifies the parts related to the visor, including lenses, frames, and gaskets.
Shows the various types of respirator capes available for different applications and protection levels.
Illustrates the breathing tube assembly and different flow control devices for air delivery.
Refers to components for air filtration and monitoring systems, directing users to the RPB catalogue.
Identifies the different air supply hoses and their associated connectors and assemblies.
General| Brand | RPB |
|---|---|
| Model | Nova 3 |
| Category | Respiratory Product |
| Language | English |
