20
NOVA 3
®
VISOR ASSEMBLY REMOVAL FOR REPLACEMENT
There is an Allen Key mounted in the padding connector. Rotate the Allen Key out of the holder
then pull down to remove.
FIGURE 4.7
To remove the Visor, undo the hinge lock
(NV3-727-2) and slide back, this will expose
the hinge pin to remove the Visor.
The Hinge Mount (NV3-727) and Latch
Mount (NV3-728) can be removed using the
Allen Key.
FIGURE 4.8
FIGURE 4.9
RESPIRATOR SETUP AND CARE CONTINUED
To Next Page
Loading...