5
A ammable or explosive atmosphere is present when used with systems including electrical
parts that are not intrinsically safe, 09-502 L4
™
Light, 09-903 NOVA TALK
™
.
FACE AND EYES:
The NOVA 3
®
respirator with Inner Lens meets ANSI/ISEA Z87.1 requirements and designed
for abrasive blasting, grinding, and other industrial applications.
The NOVA 3
®
is not designed or tested to provide protection against molten metals or
corrosive liquids.
Note: Safety glasses may be required to be worn depending on the job hazard analysis. The
NOVA 3
®
does not protect against the potential transfer of impact to glasses worn underneath
the Visor. It does not provide complete eye and face protection against severe impact and
penetration and is not a substitute for good safety practices and engineering controls.
HEAD:
The NOVA 3
®
meets the ANSI/ISEA Z89.1 Type 1C requirements for physical head protection
as a hard hat. The helmet is design to provide limited head protection by reducing the force of
falling objects striking the top of the head. Ensure the helmet is adjusted to properly t the user
by adjusting the head harness and side pads.
HEARING:
Hearing protection must be worn and properly tted when exposed to noise levels that exceed
the OSHA permissible exposure levels.
To Next Page
Loading...