7
IGNITION SWITCH
Ignition switch-used for starting and stopping
the engine. The key is used to lock the
steering, preventing theft.
ON-ALL electrical components are ON.
Off-ALL electrical components are OFF.
START BUTTON AND ENGINE STOP SWITCH
Start button - Pushing the start button will start
the engine. When button is pressed in the start
motor will crank the engine, See starting
procedures.
Engine stop switch- In case of an emergency and a
quick stop is necessary turn switch to the “OFF”
position. This switch must be in the “RUN” position
in order to start the vehicle, and should remain in
this position even while the engine is off. If you
leave ignition switch on and engine stop switch off,
the lights will stay on, causing the battery to lose life.
RUN OFF
HEADLIGHT DIMMER SWITCH, TURN SIGNAL SWITCH AND HORN
Turn signal switch - Use this switch to signal a lane change or turn.
Left Right
Horn – The horn is used to warn other
motorist.
Headlight dimmer switch – This switch is used
to change from “HI” to “LO” beam.
- HI - LO