EasyManuals Logo

RPS Hawk DLX EFI User Manual

RPS Hawk DLX EFI
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
22
AIR CLEANER
Be sure to clean the air cleaner more frequently if you are ridding in dusty or wet
areas. You local service center can help you determine the correct service interval for
your riding conditions.
Use only the air cleaner specified for your motorcycle or one of equivalent quality.
NOTICE: Using the correct air cleaner can prevent engine wear, damage, repairs,
spark plug fouling and poor gas mileage. If you use the incorrect air cleaner you may
cause severe engine damage.
NOTICE: Improper air cleaner maintenance can cause early engine wear or poor
performance.
Replacing Air Cleaner
1. You will need to remove the seat in order to access the bolt that needs to be
removed in order to take the side cover off. Remove seat by inserting ignition key
into key slot on side cover.
2. Remove bolt.
3. Remove left side cover and unscrew 3 screws holding air cleaner cover on.
4. Discard air cleaner.
5. Install new air cleaner.
6. Replace air cleaner cover using screws.
7. Replace left side cover using bolt to secure.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RPS Hawk DLX EFI and is the answer not in the manual?

RPS Hawk DLX EFI Specifications

General IconGeneral
BrandRPS
ModelHawk DLX EFI
CategoryMotorcycle
LanguageEnglish

Related product manuals