E-2
Ⅰ. SAFETY INFORMATION
1. Read the following safety information carefully before
attempting to operate or service the meter.
Laser Safety Warning
LASER RADIATION DO
EN 60825-1:1994/A11:1996
If the MEAS button is pressed while the symbol is shown
on the LCD, the meter will radiate the laser. To prevent injury,
do not look or stare into the beam. Do not point the laser
directly at eyes or indirectly off reflective surfaces.
● If the target object has a smooth surface, the laser may be
reflected and create a hazard.
● Do not radiate the laser at flammable gasses or other
possible sources of ignition.
2. Precautions:
a). Do not operate the thermometer in the presence of strong
electrical or magnetic fields, as this may prevent correct
operation.
b). Use and store the thermometer away from direct sunlight
or other strong source of light, high temperatures, high
humidity or dust.
c). If the thermometer has been kept in area of high or low
temperature, wait until it has reached a stable temperature
before use.
To Next Page
Loading...
