Need help?Do you have a question about the RS PRO 1327K and is the answer not in the manual?
General| Resolution | 0.1 °C |
|---|---|
| Accuracy | ±0.2% ±1°C |
| Display Type | LCD |
| Power Source | Battery |
| Operating Temperature | 0°C to +50°C |
| Sensor Type | K-type thermocouple |
Warning about laser radiation, do not stare into beam, avoid reflective surfaces.
Operational precautions including avoiding strong fields, sunlight, and temperature stabilization.
Specifies operating altitude, humidity, and ambient temperature limits.
Guidelines for repairs, servicing, and cleaning the device.
Explains the CE compliance symbol for EMC Directive.
Details display, auto power-off, memory, battery, operating conditions.
Covers measuring range, resolution, accuracy, temp coefficient, spectral response, field of view, emissivity, sighting, sensor.
Details measuring range, resolution, accuracy, and temperature coefficient for Type K probes.
Explains the functions of buttons like MODE, M, ▲, ▼, and the measuring trigger.
Explains what emissivity is and its importance in infrared measurement.
Step-by-step guide on how to adjust the emissivity value for accurate readings.
Provides a table of emissivity values for various metals and surfaces.
Instructions for measuring temperature using the infrared sensor or Type K probe.
How to use the MAX/MIN hold function to record extreme temperature readings.
Method for performing continuous temperature measurements and exiting the mode.
Guides on changing °C/°F units and storing/reading data in memory.
Details how to select units, alarm functions (ON/OFF, Lo, Hi), and emissivity.
Provides a detailed step-by-step procedure for setting units, alarms, and emissivity.
To Next Page
