RS 21 - Cunningham

37
4.13 - Cunningham
b)
a)
c)
Locate the following items in the customer packs.
Shackle the bottom block onto the
middle metal eye on the port side
of the mast step.
Tie one end of the cunningham control line to the
block with becket with knot #2 then pass it through
the blocks and cleat as shown.
Tie knot #3 in the tail.
40mm block with
ddle/swivel/xed
cam (bottom)
Cunningham Cunningham tail30mm block
with becket
(top)