RTI IST-10 - Hard Buttons; Safety Suggestions

CONTROL INTERFACES, IST-10
Technical Support: support@rticontrol.com - Customer Service: custserv@rticontrol.com 6
Safety Suggestions
Read and Follow Instructions
Read all safety and operating instructions before operating the unit.
Retain Instructions
Keep the safety and operating instructions for future reference.
Heed Warnings
Adhere to all warnings on the unit and in the operating instructions.
Accessories
Only use attachments/accessories specied by the manufacturer.
Heat
Keep the unit away from heat sources such as radiators, heat registers, stoves, etc., including ampliers
that produce heat.
Power
Unplug this apparatus during lightning storms or when unused for long periods of time.
Power Sources
Connect the unit only to a power supply of the type described in the operating instructions, or as marked
on the unit.
Power Sources
Connect the unit only to a power supply of the type described in the operating instructions, or as marked
on the unit.
Power Cord Protection
Route power supply cords so that they are not likely to be walked on or pinched by items placed on or
against them, paying particular attention to the cord plugs at power receptacles and at the point at which
they exit from the unit.
Water and Moisture
Do not use the unit near water—for example, near a sink, in a wet basement, near a swimming pool, near
an open window, etc.
Hard Buttons
• Power Button: Single press turns o/on display
• Mute Button: Single press disables/enables microphone
• Full Reboot: Single press of power button + mute button simultaneously
• Network IP/ Wi reset. Hold power + mute button for 4 seconds, then release
• Factory Reset: Hold power + mute button for 8 seconds then release