RK1 Universal System Controller
IMPORTANT NOTES
Please read these important notes about the RK1:
§ The RK1 should be placed in an area where it is around
normal room temperature (between 60°F to 90°F).
§ Avoid installing the RK1 in a location where it can come in
contact with direct sunlight.
§ Do not install the RK1 directly adjacent to thermostats. Heat
generated by the RK1 may affect temperature measurement.
§ Do not use sharp objects on the buttons. It is designed to
operate with a touch of your finger.
§ Do not let the RK1 get wet. It should not be handled with
wet hands or placed in an area where it could get wet.
§ Do not subject the RK1 to smoke, dust, or vibrations. The
display may be damaged from excessive shock or vibration.
§ Only use the power supply that is specified for the RK1.
Using the wrong type of power supply may result in
damage.
§ Do not disassemble the unit. Service of the RK1 should be
performed by authorized personnel only.
To Next Page
Loading...