13
It’s Under Control
®
CHAPTER 2 | INTRODUCTION
IMPORTANT NOTES
Please read these important notes about the T3-V+:
The T3-V+ should be placed in an area where it is around normal room
temperature (between 60° F to 90° F). If the temperature is too hot,
the display appears dim. If the temperature is too cold, the display
appears dark and may respond slowly.
Do not use sharp objects on the touchscreen. It is designed to operate
with a touch of your nger.
Do not let the T3-V+ get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the T3-V+ to smoke, dust, or vibrations. The display
may be damaged from excessive shock or vibration.
Only use the power supply that is provided with the T3-V+. Using the
wrong type of power supply may result in damage to the battery or
electronic components.
Do not disassemble the unit. Service of the T3-V+ should be performed
by authorized personnel only.
CLEANING
Occasional cleaning may be required, depending on use. It is
recommended that a “Clean” button is placed somewhere on the Home
page of the T3-V+. This button should link to a page that does not contain
commands or macros that could be inadvertently executed while cleaning
the unit. The “Clean” page could contain a text message or graphic of your
choosing such as:
To clean your T3-V+, lightly dampen a lint-free cloth with a glass cleaner
or mild detergent, and wipe the touchscreen, keypad and outer surfaces.
To Next Page
Loading...
Need help?
General
