When you enter the menu, the voice prompt will announce “Silent mode” On or Off. Now you can navigate
through the menu and adjust the settings as preferred.
7.1.7 Menu structure.
• Silent mode: Silences the ringer when enabled. Does not affect the stored value of ringer volume.
o On
o Off
• Language: Two languages are available on the headset. English and another language, selectable for the user.
o English
o Native
• Registration: Access code (default “0000”).
o Register
o Deregister
• Audio feedback: Choose between beeps or voice prompts (where available) as user feedback. Where no voice
prompts are available, beeps will be played and this setting is ignored. The menu will always use voice prompts.
o Voice prompts
o Beeps
• Tone Protection: Automatic protection against loud noises and protection from too high volume settings with
prolonged use of the headset.
o Off
o Office
o Quiet
• Noise reduction: Enable or disable digital noise reduction.
o On
o Off
• Equalizer: Choose between three different equalizer settings.
o Normal
o Bass
o Treble
• Auto mode: Automatic hook on when headset is removed from charger on incoming call.
o On
o Off
• Silent charging: The headset makes no call indication (neither ringer nor LEDs) while cradled.
o On: LED indication only while cradled.
o Headset Deactivated: Appear disconnected, cannot receive calls while cradled.
o Off: Normal mode w LED and audio while cradled.