Page | 5
2.1.3 Damage Inspection
The following are the recommended procedure for you to use for damage inspection:
1. Examine all relevant components for damage.
2. Make a “defective on arrival - DOA” report or RMA to the operator. Do not move the shipping carton
until it has been examined by the operator. The operator/regional representative will initiate the necessary
procedure to process this RMA. They will guide the network administrator on how to return the damaged
package if necessary.
3. If no damage is found then unwrap all the components and dispose of empty package/carton(s) in
accordance with country specific environmental regulations.
2.2 Before Using the Headset
The following are the precautions users should read before using the headset:
2.2.1 Using the Charger
Each headset is charged through the use of a headset charger. The charger is a compact desktop unit
designed to charge and automatically maintain the correct battery charge levels and voltage. The headset
charger is powered by AC supply from 110-240VAC that supplies 5.5VDC at 600mA. When charging the
battery for the first time, it is necessary to leave the headset in the charger for at least 10 hours before the
battery is fully charged, and the headset is ready for use.
2.2.3 Headset in the Charger
For correct charging, ensure that the room temperature is between 5°C and 25°C / 41°F and 77°F. Do not
place the headset in direct sunlight. If the headset is turned off when placed in charger, the handset turns
on and announces “Subscribed or Not Subscribed”
3 Headset overview
AUX Function Key (Power ON)
Volume + Key
LED Indicator
Volume - Key
Hook ON/OFF Key
Mute Key
Microphone
To Next Page
Loading...
