DAB radio
The rst time you use your R1, or if the DAB station
list is empty, it will automatically perform a station
scan to create a list of available stations.
Change station
Press or to show the station list. Pressing it
again shows the next or previous station, to tune to a
station, select it by pressing the CONTROL KNOB, or
wait a few seconds for it to automatically select.
Once the station list is displayed, you can also scroll
through the list by rotating the CONTROL KNOB and
selecting a station by pressing the knob.
You can also show the station list by selecting
MENU > Station list.
DAB radio text (DLS)
DLS (Dynamic Label Segment) is information about
the programme or track broadcast by the station.
Select what information is shown from MENU > Info.
Save preset
You can store 8 DAB stations in your preset list. See
‘Common functions’ section.
Recall preset
‘See Common functions’ section.
Station scan
If the station list is empty the radio will automatically
perform a station scan as soon as you switch to DAB.
We recommend you periodically update the station
list by selecting MENU > Station scan.
For optimal reception, fully extend the aerial and
adjust its position.
To Next Page
Loading...