Need help?Do you have a question about the Ruckus Wireless ICX Series and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| Product Series | ICX Series |
| Port Configuration | Varies by model (e.g., 8, 12, 24, 48 ports) |
| Speed | 1G/10G/40G/100G |
| Power over Ethernet (PoE) | Yes (varies by model) |
| Management | CLI, Web GUI, SNMP |
| Layer | Layer 2/3 |
| Stackable | Yes |
| Security Features | ACLs, 802.1X, DHCP Snooping, IP Source Guard |
| Redundancy | Yes (dual power supplies, hot-swappable fans) |
Connect via Telnet/SSH over IP or directly via serial interface using USB or RJ45.
Connect to the switch CLI via Telnet, SSH, or serial using a terminal emulator like PuTTY.
Understand the different privilege levels (User EXEC, Privileged EXEC, Global Config) for switch management.
Create users, assign permissions, and remove default credentials for web access.
Find product documentation, software updates, and technical assistance from Ruckus Support.
To Next Page
