Ruggerini SERIES RY - Maintenance Schedule; Recommended Service Intervals

9.0
service
00497R0990 - 15-07-2000
Air filter oil level (for engines with wet air filters)
Engine block oil level
Battery fluid level
Rocker arm valve play
Injector calibration
A ir filter
Cylinder and head fins
Fuel tank
Internal oil filter
Injectors
Air filter oil (for engines with wet oil filters) [*]
Engine block oil [*]
Air filter cartridge
Fuel filter
Dry air filter
General overhaul
5. MAINTENANCE SCHEDULE
CHECKING
[*] Use oil for Diesel engines according to MIL-L-2104D specifications with detergent
degree S.3 (MIL-L-45199B) type AGIP SUPERDIESEL MULTIGRADE 15W/40.
use SAE 5W/30 oil if the engine operates in places where the temperature is below
( ) First oil change.
The maintenance operations refer to engines that operate in normal environmental
conditions (temperature, degree of humidity, degree of dust in the environment) and can
sensibly vary, depending on the type of use (the air filter oil must be changed every 4-5 hours
in dusty places).
Overhauls include : grinding the valve housings and guides, overhauling the injector and
injection pump, inspection of the injector protrusion, cylinder and piston replacement,
replacement of the main bearings.
REPLACEMENT
CLEANING
25002500
25002500
2500
500500
500500
500
200200
200200
200
100100
100100
100
5050
5050
50
88
88
8
OPERATION