Ruide Theodolite RT-2 - 4.5 Minimum Change of Angle; 4.6 Tilt Compensation; 4.7 Laser Plummet (Optional)

4.5 Minimum Change of Angle
Change the minimum change of the angle as below. Press ▲, ▼ (HOLD,
V/%) to shift different options, and then press SET to confirm the setting.
Step 1
Step 5
dms
1”
5”
gon
0.00.05
0.00.15
mil
0.05
0.10
4.6 Tilt Compensation
Turn on and off the tilt compensation. Press ▲, ▼ (HOLD, V/%) to shift
different options, and then press SET to confirm the setting.
Compensation Off Compensation On
4.7 Laser Plummet (Optional)
Adjust the laser density of the laser plummet from grade 1 to 5. Press
▲, ▼ (HOLD, V/%) to shift different options, and then press SET to
confirm the setting.