Ruijie Reyee RG-EST Series Faqs

FAQs FAQs About the Wireless Configuration
15
The camera mode does not support independent channel settings. After the channel at the NVR end is
adjusted, the camera end automatically changes its channel to be the same as the NVR end.
Note
The available channel is related to the country or region code. Select the local country or region.
The preceding figure provides guidance on 5 GHz channel configuration. The same steps are performed
for 2.4 GHz channel configuration. The single-radio (2.4 GHz) device does not support 5 GHz
configuration.
Caution
After the channel is changed, the NVR will be reconnected to the camera. Therefore, exercise caution
when performing this operation.
(2) One-click optimization
Choose Wireless > WDS > Optimize WDS.
Click Optimize WDS so that the device automatically selects the channel again based on the interference
in the current environment, ensuring that the device works in the optimal channel. You are advised to
optimize WDS when the original channel is not the optimum.
Caution
After you click Optimize WDS, the NVR will be reconnected to the camera. Therefore, exercise caution when
performing this operation.

Ruijie Reyee RG-EST Series Specifications

General

Brand	Ruijie
Model	Reyee RG-EST Series
Category	Network Hardware
Language	English