Need help?Do you have a question about the Ruijie Reyee RG-EST Series and is the answer not in the manual?
General| Brand | Ruijie |
|---|---|
| Model | Reyee RG-EST Series |
| Category | Network Hardware |
| Language | English |
Specifies the target audience for this document, including network engineers, support staff, and administrators.
Provides the official website for accessing technical support resources and documentation.
Explains GUI symbols, warning signs, and their meanings for clear document interpretation.
Lists supported browsers and prerequisites for accessing the web management interface.
Details the default IP address and login credentials for initial device access.
Guides on connecting a PC to the bridge and accessing the web management system.
Explains how to physically or wirelessly connect a PC to the bridge for management.
Guides on setting the management computer's IP address for network segment compatibility.
Details the steps to access the device's web management system via a browser.
Introduces NVR/Camera roles and WDS/Management Wi-Fi concepts.
Explains the roles of NVR (AP) and Camera (CPE) in WDS groups.
Differentiates WDS Wi-Fi for data transfer and Management Wi-Fi for configuration.
Provides instructions on changing the device mode between NVR (AP) and Camera (CPE).
Details how to set a WDS password for the entire LAN to enhance security.
Explains setting a common management SSID and password for all bridges for secure access.
Describes how to set a WDS password for a specific WDS group for enhanced security.
Guides on setting or scanning for a WDS SSID for connecting individual devices.
Guides on setting or scanning for a WDS SSID for connecting individual devices.
Details how to set a WDS password for a single device to prevent unauthorized access.
Instructs to click Save to activate changes for WDS SSID or password.
Explains how the device selects configurations and how users can analyze the environment.
Guides on checking channel interference to find optimal wireless settings.
Covers optimizing radio channel (P14), channel width (P16), transmit power (P17), and distance (P17).
Explains the impact of changing country/region code on network devices and WDS links.
Guides on selecting and saving the target country/region code for network settings.
Explains how to configure LAN port IP addresses for network devices.
Guides on configuring static IP addresses for multiple devices in the network.
Explains how to set LAN port IP addresses for individual devices.
Guides on configuring LAN port IP addresses for a local device, using DHCP or static IP.
Describes how to enable or disable port-based flow control to manage network speed.
Covers how system alarms are displayed and how to address them promptly.
Highlights the importance of modifying default device names for better identification.
Emphasizes changing the default admin password for network security.
Advises changing the default WDS password to prevent unauthorized access.
Guides on troubleshooting network cable connection issues.
Provides steps to diagnose and resolve high latency or insufficient bandwidth issues.
Explains radar signal detection, alarms, and channel switching for WDS stability.
Introduces tools like Ping, Traceroute, and DNS Lookup for network diagnostics.
Details using Ping, Traceroute, and DNS Lookup for testing network connectivity.
Details how to collect and compress fault information for engineer analysis.
Guides on setting a secure management password for all devices in the network.
Explains how to set the session timeout duration for web management.
Provides instructions and cautions for resetting the device to factory defaults.
Guides on how to reboot the device and keep it powered on during the process.
Details methods for rebooting cameras, individually or in bulk.
Explains how to restart all connected cameras in the network.
Details how to restart an individual camera from the WDS group information.
Guides on restarting cameras connected to the current device.
Explains how to set the system time, time zone, and NTP servers.
Guides on backing up and importing device configuration files.
Covers firmware update procedures and system version display.
Details how to perform an online firmware update for the device.
Explains how to update the device firmware using a local file.
Guides on updating firmware for all devices in the network simultaneously.
Explains how to switch the system interface language between supported options.
To Next Page
