Ruijie Reyee RG-EST Series User Manual

Web-based Configuration Guide Network Settings
3.1.3 Setting the Address of a LAN Port on the Local Device
Open the LAN page.
If a DHCP server is deployed in the network, you are advised to set Internet to DHCP. If no DHCP server is
deployed, set Internet to Static IP Address, set IP Address, Subnet Mask, Gateway, and DNS Server, and
click Save.
Caution
After the IP address and subnet mask are changed, the device web page may not be accessed. You need to
enter the new IP address in the browser address bar and ensure that the IP addresses of the management
computer and the device are in the same network segment. If they are not in the same network segment,
reconfigure the IP address of the management computer. (See Configuring the IP Address of the Management
Computer) Therefore, exercise caution when performing this operation.
3.2 Port-Based Flow Control
Choose Advanced > Flow Control.
Flow control can relieve the data congestion caused by ports at different speeds and improve the network speed.
This function is enabled by default and can be manually disabled.

Ruijie Reyee RG-EST Series Specifications

General

Brand	Ruijie
Model	Reyee RG-EST Series
Category	Network Hardware
Language	English