Cookbook Configuration
94
(4) The user configuration method on the CLI is as follows:
#Add a user named ruijie under the root directory, set the password to 111, and configure only web
authentication for the account.
Ruijie(config)# subscriber static name "ruijie" parent "/" password 111
Ruijie(config)# subscriber allow "ruijie" privilege webauth
(5) If you select Allow Internal Web Auth User Password Change when configuring a username and password,
the Change Password option is displayed after web authentication is successful.
(6) Verification
After the configuration is complete, the authentication page is displayed when a user browses a web page
for the first time.
Enter the correct username and password and click Log in. The authentication success page is displayed.
To Next Page
Loading...
Need help?
General
