1-37
eWeb Configuration (Standalone Mode)
3.5.5 MGMT IP
The MGMT IP module allows you to configure the device's management IP address.
Figure 3-5-6 MGMT IP
Configuring an IP address
Configure the management VLAN, IP address, subnet mask, default gateway, and DNS server, and click Submit. A message
indicating successful configuration is then displayed.
1. VLAN 1 takes effect when the management VLAN is set to null or empty.
2. The management VLAN must be created before the configuration. To create a management VLAN, follow instructions in
VLAN List.
3. You are advised to bind a configured management VLAN to an uplink port. Otherwise, you may fail to access the eWeb
management system.
To Next Page
Loading...
Need help?
General