1-68
Ad Hoc Network Discovery Mode
4.3 Switches
The Switches module displays a list of switches (including the NBS and ES2 series) on the same network. When there are
switches on different networks, a prompt is displayed and you can click Manage to perform required operations.
Figure 4-3-1 Switches
Deleting offline devices
Select devices in Switch List, and click Delete Offline Devices. In the displayed confirmation box, click OK.
Upgrading devices
Select devices in Switch List, and click Batch Upgrade. In the displayed confirmation box, click OK.
Configuring a device
Click Manage in the Action column. In the displayed page, configure the corresponding device.
Tips:
1. Only offline devices can be deleted.
2. Device configuration in ad hoc network discovery mode is the same as that in standalone mode.
3. The configurations of the ES2 and NBS series are different. (For configuration of the ES2 series, see the ES2 eWeb
Configuration Guide.)