EasyManua.ls Logo

Ruijie RG-S2910-24GT4SFP-UP-H - Page 14

Ruijie RG-S2910-24GT4SFP-UP-H
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.3 RG-S2910-10GT2SFP-UP-H
Technical Specifications
Model
RG-S2910-10GT2SFP-UP-H
CPU
Built-in CPU, single-core processor, 400MHz
Flash Memory
256M
SDRAM
DDRIII 512MB
Optical Module
Supports 1000base-X only. For details, see Appendix B.
The supported module type may change at any time. Consult us for the latest information.
SFP Port
Supports 1000Base-X modules.
Power Supply
AC input
Rated voltage range: 100V to 240V
Maximum voltage range: 90V to 264V
Frequency: 50/60 Hz
Rated current: 8A
HVDC input
Voltage range: 192V to 290V
Current range: 0A to 6A
EEE
Supported
PoE
Ports 1-8 are HPoE-capable with the maximum power output of 95W.
The maximum output power is as follows.
AC input
90 to175VAC: 380W
175 to 264VAC: 760W
HVDC input
192 to 220VDC: 380W
220 to 290VDC: 760W
The HPoE ports support the maximum power supply of 95W only when connected with
HPoE PDs. For example, RG-PBOX-DC12 and RG-PBOX-AC24.
HPoE ports support IEEE 802.af/at PoE.
The available number of PDs is determined by PSE output power and PD input power in
practice.
Power
Consumption
Less than 30W with no PoE load
Less than 870W with full PoE load
Operating
Temperature
0 to 50
Storage
Temperature
-40 to 70

Related product manuals